Betekenis van:
moment of inertia

moment of inertia
Zelfstandig naamwoord
    • the tendency of a body to resist angular acceleration

    Hyperoniemen


    Voorbeeldzinnen

    1. Moment of inertia of engine flywheel: …
    2. Additional moment of inertia with no gear engaged: …
    3. Moment of inertia about the longitudinal axis through the centre of gravity
    4. Moment of inertia of the combined flywheel and transmission is within ± 15 % of the type approved engine.
    5. State moment of inertia of combined flywheel and transmission at condition when no gear is engaged [4] Specify the tolerance.
    6. State moment of inertia of combined flywheel and transmission at condition when no gear is engaged [4] Specify the tolerance. :
    7. Weight 29,57 kg (65,31 lbs) Moment of inertia 33,2 kg-m2 (294 in.-lb-sec2) about pivot axis
    8. Tractor reference moment of inertia about the centre line of the rear wheels, whatever the mass of these rear wheels may be
    9. Moment of inertia of a new combined flywheel and transmission is within 15 % of the engine flywheel and transmission system approved.
    10. The actual engine torque is the torque read on the load cell plus the moment of inertia of the brake multiplied by the angular acceleration.
    11. The moment of inertia of the femur and tibia, about a horizontal axis through the respective centre of gravity and perpendicular to the direction of impact, must be 0,127 ± 0,010 kgm2 and 0,120 ± 0,010 kgm2 respectively.
    12. The moment of inertia of the femur and tibia, about a horizontal axis through the respective centre of gravity and perpendicular to the direction of impact, shall be 0,127 ± 0,010 kgm2 and 0,120 ± 0,010 kgm2 respectively.
    13. The centre of gravity of the impactor, including instrumentation, shall be located in the centre of the sphere with a tolerance of ± 2 mm. The moment of inertia about an axis through the centre of gravity and perpendicular to the direction of impact shall be in the range of 0,008 to 0,012 kgm2.
    14. The centre of gravity of the impactor, including instrumentation, must be located in the centre of the sphere with a tolerance of ± 5 mm. The moment of inertia about an axis through the centre of gravity and perpendicular to the direction of impact must be 0,010 ± 0,0020 kg/m2.
    15. The centre of gravity of the impactor, including instrumentation, shall be located in the centre of the sphere with a tolerance of ± 5 mm. The moment of inertia about an axis through the centre of gravity and perpendicular to the direction of impact shall be in the range 0,010 to 0,013 kgm2.